Guide
Fabricate
Method of manufacture
Learn make mold Headed head in red RTV for Reproduce easily a form or model. Make your own steelhead, perfectly adapted to your Flexible lures and your fishing techniques.
1 - construction of a template
Using boards or malls, build a box whose 4 sides and bottom are removable. Adapt the size of the box to that of the leaded head to make.
2 - positioning the master
Build a gallop on which one would tile the triple back of a hard lure. The head of the latter will serve as a master. Place the potency near the template so as to position the master in the empty template.
3 - preparation of red RTV
Pour the necessary amount of silicone Bricoleurre In a container for mixing with the catalyst. Add the catalyst: 2% for a slow (12h) jack to 5% for a quick jack. Shake well for 2 minutes.
4 - pouring the RTV
Brush the master with the Master with Vaseline.
Pour the RTV into the template all around the master, gradually to let the air bubbles escape.
The silicone is fluid enough to come and marry all the details of the master. Tap the template to make up all the air bubbles. Leave a few hours (depending on the% catalyst used).
5 - pouring of lead
Remove the master. Add thehook.
6 - demouling
Remove the lead (attention is hot!) By entering thehook using a manic.
Paste the eyes Bricoleurre... and that's the result!
An example of mounting...
