Guide
Manufacture of a flexible lure
Method of making a soft lures plastisol
WARNING
The preparation and heating of the plastilor generates abundant and irritating smoke. It is strongly recommended to protect yourself by a mask and operate in a very ventilated room or outdoors.
1 - preparation of the dough
Pour the plastilor into a pan placed on a gas fire, an electric stove or even a microwave. Plitter a minimum of 1 cm thick to later shake the whole.
2 - plastilor Heating
Heating by stirring the plastilor until the liquid becomes transparent.
3 - Added colorant
Add dropwise to dose the mixture while waving.
4 - added ilarm powder
Shake down to distribute the powder until iridescent trails in the liquid.
5 - adding sequins
It is advisable to mix several glitter colors for more efficient reflections.
6 - molding
Carefully pour the mixture into the mold By finishing with a slight curved on the top because there is always a retraction of the plastilor during cooling.
7 - inserting a rattle
This optional operation is to be made while the plastileur is still liquid.
8 - demouling
After allowing a few minutes to cool, prepare demolding by removing the edges to take off the lure of the mold.
9 - cooling
Immerse the lukewarm lure in cold water to accelerate cooling and stiffening.
10 - ebbing
Embarring finish of scissor.
11 - mounting
Mount on leaded head. Finish with a cyano glue point between the head of the lure and the leaded head.
