Silicone to realize its plumb mussels. The drying time depends on the amount of catalyst.

High quality silicone with a micron order molding accuracy.

Adapted to the pouring of lead: Resists more than 320 degrees C.

For the calculation of the weight, the density of the red RTV is 1.4 (1.4g /en/module/dgcontenttranslation/urlstranslation at 20 ° C)

Small example to calculate the weight of RTV necessary to the realization of a mold :

My recipient is 20 cm long by 5 cm wide and 5 cm high.

20x5x5 = 500 cm3 500x1.4 = 700 g of RTV needed to fill it ...

The silicone lead Bricoleurre is a polycondensation silicone elastomer, which is in the form of viscous liquid. After mixing the 2 components, the working time is some minutes.Le Mixed gradually thickened, and demolding can be done in a few hours.
- Flexible, homogeneous and resistant mass
- Fidelity of impression with micron
- Self-Demolley
- Resists 320 degrees C for lead, epoxy resins
- Undechible
- Crosslinking time at 20 degrees C, catalyst at 10%: 24h
- Recommended dosage 5%, or 5 g catalyst for 100 g of RTV lead
- Color: Red
- Current: 24h
- Hardness: (Shore a) 60
- Conservation: 12 months in closed packaging.
- Solvent: White Spirit
- Diluent: silicone oil (5 to 10% max)

Job boards :
- Wear suitable gloves
- Avoid contact with the eyes. In case of eye contact, rinse thoroughly with clear water. In case of irritation, consult a doctor.
- Do not leave the scope of children.
- Do not ingest.

Use:
- Not suitable for use and food contact.

Pot of 5 kg with catalyst (4,750 kg silicone + 250g catalyst).