Guide
Fabricate mold flat back
Method of making a mold In RTV red monohull
Learn make mold Flat back to flow your flexible lures simply. RTV Red or RTV White, Plastiline + a sealed frame. Nothing simpler. Follow the step steps in this item and Make your own soft lure mussels.
1 - Preparation of plastiline 50
Place the plastiline 50 in a minimum atmosphere at 20 degrees. Otherwise, warm up the dough with a hairdryer.
Then cut a piece. Well knead, for homogeneissery and waiting.
2 - Formatting of the model
Depending on the sought form, you can roll, squeeze, work with sculpture instruments.
As you go the details, eye, gills, slots to improve flexibility. The tail can be worked according to the imagination, depending on the desired movement.
3 - The molding tray
Choose a plastic tray with adequate dimensions. Ideally, there must be a centimeter between the edges and the model on each side. Provide a depth of 1 cm more than the thickness of the lure. It is not necessary to fill up the bac. The vast majority of plastics are compatible with silicone Bricoleurre. Prefer a flexible plastic that will facilitate demolding. Ex: An old polyethylene lure box is perfect for.
Paste the model at the bottom of the molding pan to prevent it from rising to the silicone surface. Pour the necessary amount of silicone Bricoleurre In a container for mixing with the catalyst.
Add the catalyst: 2% for a slow (12h) jack to 5% for a quick jack. Shake well for 2 minutes.
Brush the model with the model with vaseline.
4 - Molding
Pour into the tray on the model, gradually to let the air bubbles escape. Silicone is fluid enough to come and marry all the details of the lure model. Tap mold To make sure all air bubbles. Leave a few hours (depending on the% catalyst used).
5 - The demolding
Unmould the entire tray and remove the model.
