This silicone in malaxer pulp is for the manufacture of plumb molds. She is an alternative to the RTV.

Use: See the description of the implementation of the mouthpiece

The most:

- a mold In Bricopate is manufactured in 20 minutes for a double hull, against 2x 24 hours for RTV

- It looks better at the temperature in time that the RTV for large leads> 100g (the molds hold several hundred lead pours)

- easier to handle than the RTV, because in dough

- We use that the amount we need

Tip speed: hard after 10 minutes. One mold Double hull is feasible and ready to flow in less than 30 minutes.
Facility: Works at the cutter easily
Practice: Use of the quantity required only because manipulable easily before catalyze (non-adhesive paste)
Solidity: Resistant to several hundred pouring, without talc
Stiffness: keeps the shapes with the pressure during the casting of the lead

The least:

Less casting accuracy than the RTV for details
Request a good organization because the plug speed is such that it is necessary to go quickly enough after the mixture with the catalyst for the impression.

TIPS:

- Wear suitable gloves
- Avoid contact with the eyes. In case of eye contact, rinse thoroughly with clear water. In case of irritation, consult a doctor.
- Do not leave the scope of children.
- Do not ingest.
 

For info

Following a modification of the manufacturer, we can no longer get 30 ml tubes that are suitable for 1 kg. It is imposed on us of 60 ml tubes that can be used for 2.5 kg of bricopate.